Dynamis
Home
Dynapox Marine
EPO Dynaweight
Z-TEC Ceramic
Potting Compounds
Concrete Repair
Adhesives
Coatings
Custom Formulation
Dynamis
DYNAPOX
MARINE EPOXY SYSTEMS
To Purchase Online, Visit our Online Dynapox Store.
| LAM 10, 30, 60, and 120 Low-viscosity 100% solids laminating resins with excellent wetting and anti-sag qualities. Employment of the latest in epoxy technology provides systems with no blush, thereby reducing or eliminating interlaminate surface preparations. Pot life of 10, 30, 60, 0r 120 minutes at room temperature, respectively. LAM 10 may be used in low-temperature applications down to 36 degrees F. |
| GP 10, 30, 60, and 120 Higher viscosity 100% solids general purpose resins designed for a multitude of uses in boat manufacturing and repair. Employment of the latest in epoxy technology provides systems with no blush, thereby reducing or eliminating interlaminate surface preparations. GP resins perform excellently as liquid adhesives, and can be filled with various fillers to create pourable and semi-pourable liquids or mastic solid pastes useful in various applications. Pot life of 10, 30, 60, and 120 minutes respectively at room temperature. GP 10 may be used in low-temperature applications down to 36 degrees F. |
| GP-GEL 20 and 35
Extremely user-friendly 100% solids 1:1 mix ratio non-sag epoxy gel system. There is no shrinkage, sagging, or creep upon curing. Excellent for creating fillets with a round-ended spatula or similar tool. Pot life of 20 and 35 minutes respectively at room temperature. |
| EPO COAT GP 75
High solids solvent-borne 1:1 mix ratio general purpose epoxy coating for use on wood, fiberglass, metal, epoxy resins, and masonry. May be applied by brush, roller, or spray. Works well for coating bilge areas, rope lockers, engine compartments, ice chests, and interior repaired hull areas. Create a non-skid surface by adding silica sand or aluminum oxide aggregate. |
| EPO COAT GP 100
High gloss durable 100% solids 1:1 mix ratio general purpose epoxy coating for use on wood, fiberglass, metal, epoxy resins, and masonry. May be applied by brush or roller. May be sprayed if thinned with MEK. Works well for coating bilge areas, rope lockers, engine compartments, ice chests, repaired hull areas, and decks. May be applied below water line. Create a non-skid surface by adding silica sand or aluminum oxide aggregate. |
| EPO COAT CT 100
Easy to use 100% solids corrosion resistant epoxy coal-tar marine coating. Adheres to wood, fiberglass, epoxy resins, metal, and masonry. May be applied by roller or brush, or may be sprayed if thinned with MEK. Resists the effects of fresh water and salt water in tidal, splash, or weather zones. |